To properly care for combat boots, the first step is to buy a model that's suitable for the conditions they'll be used in.
A new pair of combat boots requires treatment, and this should be done immediately after purchase. To improve water repellency, apply shoe cream, thoroughly coating the seams and joints. Shoe wax or glycerin can also be used.
.jpg)
After each particularly active use, you'll need to clean your boots of dirt with a damp cloth or sponge, then reapply protective wax or shoe polish.
To ensure all the products are thoroughly absorbed, it's best to schedule this cleaning for the evening before bed. By morning, your boots will be clean and tidy, all that's left is a polish.
To dry of combat boots , the easiest way is to fill them with newspaper. Never try to dry your shoes on a radiator. Once dry, wipe them and lubricate them with the products we've already discussed.
In colder temperatures, genuine leather combat boots can be lubricated with natural oil to improve the elasticity of the material.
Don't forget to wash the insoles, and again, we're back to the advice against drying them on a radiator.
.jpg)
After each wear, try to air out your shoes, especially after prolonged use in hot weather. Thoroughly clean the ventilation holes. If there is water in the shoe, drain it. Wipe the inside of the shoe with a damp cloth and soap, then dry thoroughly.
Clean your shoes as often as possible.
Let's summarize the main aspects of ankle boot care:
- genuine leather shoes: use a cloth, sponge, or paper towel. Wash and wash in cool water.
- suede and nubuck shoes: use a special rubber brush and a brass brush. Shoes can be cleaned with a rubber brush or brass wire. Wash and wash in cool water.
- fabric shoes (Cordura, Kevlar, etc.): do not use harsh cleaning methods.
You can buy ankle boots wholesale in our online store.